Wall mounting indoor box, it has been designed to be the point of interconnection between subscribers in the building and the operator’s fiber network.
The fiber routing is completely organized, ensures the maintenance of the fiber curvature radius along the multiple paths (r>30mm G.652).
Splice trays allow the inclusion of mechanical or fusion splices.
There are two clearly separated areas, namely “feeding” and “interconnection”. Both areas are separated with a swivel patch-panel.
Each area has its own door with triangular key, to set the access policy.
These boxes are easily stackable and have reduced height, allowing each operator to have its own separate unit at the same building.
Input/output ports located on the left side of the box for cables from 5 to 16mm. Mid-span branching cable allowed. Sliding tray that allows the fixation of cables outside the box.
Removable panels on the right side for interconnecting stacked boxes by using fiber patchcords.
Inner splitter bracket to house cassette splitters.